BTXYQ - PHOTOCNDUCTR, M30-40,6670 SERIES, 1669051
- MSDS: BTXYQ
- Manufacturer: IBM CORP
- Product Name: PHOTOCNDUCTR, M30-40,6670 SERIES, 1669051
- National Stock Number: 7025-00N046737
Product Identification
Product ID:PHOTOCNDUCTR, M30-40,6670 SERIES, 1669051
MSDS Date:01/19/1990
FSC:7025
NIIN:00N046737
MSDS Number: BTXYQ
Responsible Party
ARMONK, NY 10504
US
Emergency Phone: 800-426-4333
Info Phone: 800-426-4333
Cage: 7N876
Contractor
Telephone: 800-426-4333/FAX 214-280-3903
Cage: 30874
Ingredients
TRILAYERED PHOTOCONDUCTOR PRODUCED BY 3 SEPARATE COATING
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
ALUMINIZED MYLAR SUBSTRATE (CONSISTS OF ING 3)
OSHA PEL N/K
ACGIH TLV: N/K
POLYESTER
OSHA PEL N/K
ACGIH TLV: N/K
CHLORODIANE BLUE PIGMENT (SECOND LAYER)
OSHA PEL N/K
ACGIH TLV: N/K
BINDER SYSTEM (MIXTURE); (THIRD LAYER IS A BINDER
OSHA PEL N/K
ACGIH TLV: N/K
POLYCARBONATE
OSHA PEL N/K
ACGIH TLV: N/K
POLYESTER
OSHA PEL N/K
ACGIH TLV: N/K
P-DIETHYLAMINOBENZALDEHYDE 1,1-DIPHENYLHYDRAZONE
OSHA PEL N/K
ACGIH TLV: N/K
ACRYLIC (TYPE NOT SPECIFIED)
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE & CHRONIC:NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE KNOWN
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O2/ARTF RESP) . EYES: IMMEDIATELY FLUSH
W/POTABLE WATER FOR A MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM M
D . SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . NONE REQUIRED
(MFR).
Fire Fighting
Extinguishing Media:IF FIRE SHOULD OCCUR INVOLVING PHOTOCONDUCTOR,
CONVENTIONAL CO2 OR DRY CHEMICAL EXTINGUISHERS ARE RECOMMENDED.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS PHOTOCONDUCTOR MATL IS SAFE FOR ITS
INTENDED USE IN ELECTROPHOTOGRAPHIC PROCESS. DO NOT USE FOR ANY
OTHER REASON. LIKE ANY MYLAR BASED THIN FILM, (SUPDAT)
Accidental Release
Spill Release Procedures:NO APPLICABLE INFORMATION FOUND.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEAT DURING STORAGE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:FOR EMERGENCY USE, WEAR NIOSH/MSHA APPROVED
SELF- CONTAINED BREATHING APPARATUS.
Ventilation:NONE REQUIRED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:IT CAN BECOME FLAMMABLE UNDER CERTAIN CONDITIONS. IT SHOULD
BE RETURNED TO ITS ORIGINAL PACKING CONTAINER & DISPOSED OF THROUGH
THE NORMAL LANDFILL PROCESS.
Chemical Properties
HCC:N1
Appearance and Odor:BLUISH COLORED COATED ALUMINIZED MYLAR; NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
NO APPLICABLE INFORMATION FOUND.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE,
UNIDENTIFIED ORGANICS.
Disposal
Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. NO SPECIAL REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.